Product DescriptionPlain 1000 3000 6000 5000 series 1.0mm 1.2mm 1.5mm Stucco Embossed Aluminium Sheet Coil
There are many kinds of embossed patterns, which can be selected according to different decorative effects and functional requirements. Common ones include.
Classic basic pattern
Orange peel pattern/orange peel pattern
One of the most classic and common patterns, the surface presents evenly distributed small bumps similar to orange peel. It has fine texture and soft touch, good anti-slip, wear-resistant and scratch-resistant properties, and can effectively hide minor scratches and stains. It is widely used.
Diamond pattern/diamond pattern
It is composed of regularly arranged diamond-shaped protrusions, with a strong three-dimensional sense, obvious decorative effect, and good anti-slip performance. It is often used in areas that require anti-slip and places that emphasize decoration.
Five-rib pattern
There are 5 parallel raised ribs on the surface, and there are grooves between the ribs. This is a pattern with excellent anti-slip performance, especially suitable for areas with large traffic, such as platforms, stair treads, passages, workshop floors, truck floors, refrigerated compartments, etc.
Stripe/straight stripes
Parallel, equidistantly arranged straight raised stripes, simple and elegant, with a sense of directional extension, can guide the line of sight, often used for walls, elevator cars, furniture panels, etc.
Imitation of natural material texture
Wood grain
Through embossing technology, the texture and annual rings of various woods are realistically simulated. Combined with surface spraying or transfer technology, it can achieve a visual effect that is indistinguishable from the real thing, providing a warm wood feel for modern architecture and interior design, while retaining the superior performance of aluminum plates. Used for walls, furniture, door panels, etc.
Stone grain
Imitating the texture and texture of natural stone, providing the heaviness and natural beauty of stone, but with lighter weight, lower cost, and more convenient construction. Used for interior and exterior wall decoration, column cladding, etc.
Brick grain
Imitating the texture and joint effects of blocks such as red bricks and cultural bricks to create a retro or industrial style.
Geometric and artistic grain
Checkered/grid grain
The criss-crossed raised lines form evenly sized squares, which are regular and orderly, with a strong sense of decoration.
Pebble pattern/pebble pattern
imitates the rounded shape and natural distribution of riverbed pebbles, with an uneven surface, unique touch, and good anti-slip properties. It is often used on the ground or special decorative areas.
Flying swallow pattern/raindrop pattern
Textures similar to the shape of water drops or flying birds, arranged regularly or randomly, full of dynamic and artistic atmosphere.
Woven pattern
imitates the texture effect of bamboo, rattan or fabric, adding a natural and simple or modern fashion sense.
Hammer pattern
imitates the traces left by hand-hammering, with a retro, rough and artistic effect.
Product Specification
| 1)1000 Series Alloy (Generally called commercial pure aluminum,Al>99.0%) |
| Alloy | 1050 1050A 1060 1070 1100 |
| Temper | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/
H26/H36 H18/H28/H38 H114/H194, etc. |
| Specification | Thickness≤6.5mm; Width≤1600mm; |
| Application | Lid Stock, Industrial Device, Storage, All Kinds of Containers, etc. |
| Feature | Lid Shigh conductivity, good corrosion resistant performance, high latent heat
of melting, high-reflectance, well welding property, low strength, and not
suitable for heat treatments. |
| 2)3000 Series Alloy (Generally called Al-Mn Alloy, Mn is used as main alloy element) |
| Alloy | 3003 3004 3005 3102 3105 |
| Temper | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/
H36 H18/H28/H38 H114/H194, etc. |
| Specification | Thickness≤6.5mm; Width≤1600mm; |
| Application | Decoration, heat-sink device, external walls, storage, sheets for construction, etc. |
| Feature | Good rust resistance, not suitable for heat treatments, good corrosion resistance
performance, well welding property, good plasticity, low strength but suitable
for cold working hardening |
| 3)5000 Series Alloy (Generally called Al-Mg Alloy, the Mg is used as main alloy element) |
| Alloy | 5005 5052 5083 5086 5182 5754 5154 5454 5A05 5A06 |
| Temper | O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34
H16/H26/H36 H18/H28/H38 H114/H194, etc. |
| Specification | Thickness≤6.5mm; Width≤1600mm; |
| Application | Marine Grade Plate, Ring-Pull Can End Stock, Ring-Pull Stock, Automobile
Body Sheets, Automobile Inside Board, The Protective Cover On Engine. |
| Feature | All the advantages of normal aluminium alloy, high tensile strength & yield strength,
good corrosion-resistant performance, well welding property, well-fleet strength,
and suitable for anodic oxidation. |
| 4)6000 Series Alloy (Generally called Al-Mg-Si Alloy, the Mg and Si are used as main alloy elements ) |
| Alloy | 6061 6063 6082 |
| Temper | O T, etc. |
| Specification | Thickness≤6.5mm; Width≤1600mm; |
| Application | Automotive, Aluminium For Aviation, Industrial Mould, Mechanical Components,
Transport Ship, Semiconductor Equipments, etc |
| Feature | Good corrosion-resistant performance, well-welded property, good oxidability,
easy to spray-finish, well oxidation coloring, good machinability. |
| Material | 1060,1200,1100,2024,3003,3004,6061,7075,8011 |
Product details
Product Tags:
|
|
Stucco Embossed Aluminium Sheet Coil 1000-6000 Series 1.0-1.5mm Images
|
